Aluminum Composite Panel:
the material behind most of our signs.
ACP is the standard substrate for fascia signs, hoarding, safety boards, pylon faces, and building cladding signage across the UAE — flat, rigid, corrosion-resistant, and available in a fire-rated (FR) core for regulated applications. Here's what it is and where it's used.
- ✓3mm and 4mm panel thickness in stock
- ✓Certified FR-core for hoarding & regulated sites
- ✓UV-cured print with protective laminate
- ✓Cut, routed & fabricated in-house in Ajman
ACP fabricator
in Dubai & UAE.
Aluminum Composite Panel — two thin aluminium sheets bonded to a solid polyethylene or fire-rated core — is the substrate behind most of the signage we produce: fascia sign faces, hoarding panels, safety and compliance boards, pylon faces, and building identification cladding. It's flat, rigid, doesn't warp in UAE heat the way PVC does, and takes a UV-cured print or a solid colour finish equally well.
We cut, route, and fabricate ACP in-house at our Ajman facility rather than outsourcing panel work, which means faster turnaround and tighter control over finish quality — panel flatness and edge finishing are where a rushed ACP job usually shows.
- ✓3mm and 4mm panel thickness held in stock for fast turnaround
- ✓Certified Fire-Rated (FR) core available and required for hoarding and near temporary structures under Dubai Civil Defence rules
- ✓UV-cured ink with a protective laminate on every printed face — never standard solvent print
- ✓In-house cutting, routing, and folding — no third-party fabrication delays
Where we use ACP across our signage
ACP isn't a sign product on its own — it's the substrate underneath many of the products we fabricate. Here's where it shows up.
Flat, rigid panel faces for shopfront fascia signs — holds a crisp cut-vinyl or printed graphic without the waviness PVC develops in direct sun.
FR-core ACP is the standard for perimeter hoarding on UAE construction sites, meeting Dubai Civil Defence fire-rating requirements for temporary site structures.
Project site boards and mandatory safety boards are built on 3-4mm ACP in a lockable frame — rigid enough to resist tampering, light enough to mount without heavy structural support.
Solid-colour or printed ACP cladding for pylon and monument sign structures, giving a clean painted-metal look without the weight of solid aluminium sheet.
Large-format building name and logo cladding, routed and channel-let for illuminated letters or flat-mounted for daytime identification.
Facility map boards and directory signage use ACP for its flat, laminated print surface and resistance to warping when mounted outdoors.
ACP vs other outdoor sign substrates
| Warp resistance | Weight | Fire rating | Typical use | |
|---|---|---|---|---|
| ACP (3-4mm) | High | Light | FR-core available | Fascia, hoarding, safety boards |
| PVC foam board | Low in direct sun | Very light | Not fire-rated | Short-term indoor/outdoor signage |
| Solid aluminium sheet | High | Heavy | Non-combustible | Structural pylon & monument faces |
| Correx / corrugated plastic | Low | Very light | Not fire-rated | Temporary event & site signage |
The right ACP spec
for the sign it's going into.
ACP is not one product — panel thickness, core type, and finish all change depending on what the panel is going into. A hoarding panel needs a certified FR core; a fascia face doesn't. Getting this wrong either overspends on a simple sign or produces a non-compliant hoarding panel.
How we fabricate ACP signage — start to install
You might also need
Common questions about aluminum composite panel (acp) signage
- ACP is a flat panel made of two thin aluminium sheets bonded to a solid core — either standard polyethylene (PE) or a certified Fire-Rated (FR) core. It's rigid, doesn't warp in heat the way PVC does, and takes both printed graphics and solid colour finishes.
- Dubai Civil Defence requires certified Fire-Rated ACP on construction hoarding and near temporary site structures. For fascia signs, directory boards, and most other applications not near a fire-load risk, standard PE-core ACP is normal. We confirm which applies before quoting.
- 3mm is standard for most fascia and directory signage. 4mm is used for larger panels and structural cladding faces where extra rigidity is needed. Panel size and mounting method determine the right choice.
- With UV-cured print and a protective laminate, printed ACP signage typically holds up 3-5+ years outdoors before a refresh is needed, well beyond standard solvent-printed PVC.
- Yes — ACP is routed to create channel letters or light boxes, with the panel forming the return and face structure while the illumination sits behind or within it.
- ACP typically costs more per panel than PVC foam board, but lasts significantly longer outdoors without warping or fading, which usually makes it the lower total cost for anything meant to stay up more than a few months.
- Yes — solid-colour ACP is available in any RAL reference, matched to your brand or building specification.
- In-house, at our Ajman facility — cutting, routing, and folding are all done on our own equipment, which keeps turnaround faster than outsourcing to a third-party panel shop.
Need ACP signage or
cladding fabricated?
We manufacture outdoor & indoor signs, pylon signs, building wraps, menu boards — how can we help with your project?