Acrylic signs made, finished and installed by one team
We design, cut, assemble and fit every sign ourselves at our Ajman workshop, then install it at your office, clinic, shop or showroom in Dubai, Sharjah or Ajman. Send us your logo and we will show you the mock-up before you commit.
What we make and who it is for
We make acrylic signs: layered 3D letters, backlit logos, reception walls, door signs, nameplates, light boxes and directory panels. Most of our work is for offices, clinics, salons, restaurants, showrooms and retail shops, plus contractors and agencies who need signs for their own clients.
Acrylic (PMMA) is a rigid, glass-clear or coloured plastic sheet. It cuts cleanly, polishes to a sharp edge, takes LED light evenly and holds its colour when you use UV-grade cast sheet. That is why it is the usual choice for reception logos and indoor branding.
Written by the Bayan Signage production team · Updated October 2026
One workshop, four stages, no hand-offs
Nothing goes to an outside factory. The person who draws your sign is in the same building as the person who cuts it, which is why mistakes get caught early and timelines stay honest.
Design and mock-up
Our designer cleans up your logo, sets sizes and thickness, and places the sign on a photo of your wall. You approve it before anything is cut.
Cutting and routing
Our machine operator cuts the acrylic on our CNC router and laser, matching the approved file to the millimetre.
Finishing and assembly
Our letter technician polishes edges, bonds layers, fits the LED modules and wires the driver, then checks each piece against the proof.
Installation on site
Our own installers survey the wall, drill with the right fixings for the surface, level the sign and leave the area clean.
The people who build your sign
A sign is only as good as the hands behind it. These are the roles on every project, each one done by our own staff.
Designer
Prepares artwork, picks thickness and finishes, and produces the wall mock-up. Will tell you if a detail is too small to cut cleanly.
CNC and laser operator
Runs the routers and laser cutters, sets the cutting parameters for each sheet and checks accuracy against the file.
Letter technician
Polishes, bonds, paints and assembles letters and logos, and fits the LED lighting where the design needs it.
Installer
Surveys the site, fixes the sign to gypsum, concrete, glass or panel, and handles the wiring neatly.
Project coordinator
Your single contact. Confirms the quote, keeps the schedule and arranges site visits and landlord paperwork.
Types of acrylic signs we make
Every sign is made to your size and brand colours. If you are not sure what suits your space, send a photo and we will suggest options.
3D letters and logos
Layered or stand-off letters in gloss, matte, mirror or metallic finishes. A popular pick for reception walls.
Backlit and halo-lit signs
LED-lit acrylic that glows evenly, so the sign reads clearly day and night.
Reception and wall signs
Logo walls for offices, clinics and showrooms, fixed cleanly with hidden mounts.
Door signs and nameplates
Engraved or printed room signs and desk nameplates, one-off or in matching sets.
Light boxes
Slim LED boxes with printed or cut-vinyl faces for shops, menus and promotions.
Directory panels
Floor directories and wayfinding panels, with tactile versions where required.
Choosing thickness and finish
Use this as a starting point. We confirm exact specifications after seeing your wall and artwork.
| Where it goes | Typical thickness | Finish we suggest | Lighting |
|---|---|---|---|
| Door sign or nameplate | 3–5 mm | Printed or engraved, matte | None |
| Reception logo | 10–20 mm, layered | Gloss, mirror or brushed gold | Optional halo LED |
| Backlit sign | 5–10 mm opal white | Opal or translucent colour | LED front or back |
| Outdoor shop sign | 10 mm+ UV-grade cast | Gloss | LED modules |
| Directory panel | 5–8 mm | Clear with printed back | None or edge-lit |
When acrylic is the right choice
Indoor branding, reception walls, backlit logos, nameplates and anywhere you want a crisp, polished edge.
When we suggest something else
Large exposed fascias often last longer in stainless steel or ACP, and a soft neon look suits LED neon flex. We will say so rather than sell you the wrong material.
How we keep quality consistent
Because everything happens under one roof, checks happen at each hand-over rather than at the end.
- Mock-up approved by you before cutting starts
- Site measurements taken by us, not guessed from a photo
- Cast acrylic used for outdoor and long-life signs
- Finishing inspection against the approved proof before dispatch
- Installation by our own crew, with the site left clean
Trade and repeat orders
We also work as an acrylic signage supplier for fit-out contractors, branding agencies, developers and facility managers.
That means matching finishes across many rooms or branches, steady lead times on repeat orders, and one point of contact for the whole job. If you manage multiple sites, tell us and we will plan production and installation around your schedule.
Where we work
Our workshop is in Ajman. We install across the northern emirates and Dubai.
Related services from the same team: LED signage, wayfinding signs and LED displays.
Questions we hear often
Short, honest answers. If yours is not here, call or message us.
What are acrylic signs and where are they used?
Acrylic signs are cut, engraved, printed or layered from PMMA sheet, a rigid, clear or coloured plastic. People use them for reception logos, 3D letters, door signs, nameplates, light boxes and directories, mostly indoors but also outdoors when UV-grade cast acrylic is used.
How long do acrylic signs last in UAE heat?
Indoors they last for many years. Outdoors it depends on the sheet and the exposure. We use UV-stable cast acrylic for exterior signs and suggest a different material if a spot gets harsh direct sun all day.
How much does an acrylic sign cost?
It depends on size, thickness, number of layers, lighting and installation. A small nameplate and a large illuminated logo are very different jobs. Send your logo and wall size and we will give you a fixed quote, usually within 24 hours.
Do you design the sign, or do I need ready artwork?
Either works. Our designer can clean up your existing logo or build the layout from scratch, then show the sign on a photo of your wall so you can approve it before production.
Who installs the sign?
Our own installers do. They measure the site, choose fixings that suit the wall, level the sign, connect the lighting and clean up afterwards. We do not hand installation to a third party.
How long does it take?
Simple non-illuminated signs are often ready within a few working days of approving the design. Illuminated and multi-layer signs take longer. We confirm the timeline in your quote.
Do outdoor signs need approval?
Indoor signs usually need only landlord or mall approval. Outdoor and fascia signs generally also need municipality approval, and each emirate has its own process. We prepare the drawings and guide you through it.
Do you supply acrylic signs to contractors and agencies?
Yes. We work as an acrylic signage supplier for fit-out contractors, branding agencies and facility managers, including repeat orders with matching finishes across several sites.
Tell us about your sign
Send your logo, the wall size and the location. We will come back with a mock-up and a fixed price, usually within 24 hours.
📞 +971 56 637 2656
📍 Our sign shop: Ajman Industrial Area 2, Sanaiya, Ajman. Call before visiting, or ask for a free site visit.