Banner and Flex Printing in Dubai and the UAE
Flex and fabric banners are the quickest way to put a large message outdoors. We print, finish and fit them in-house, from a single shop banner to a run for a whole campaign.
- Materials
- Frontlit, backlit, mesh, fabric
- Finishing
- Hems, eyelets, pole pockets, welding
- Print width
- Large rolls, joined for bigger sizes
- Fixing
- Ties, bungees, frames, poles
What is flex printing?
Flex printing is large format printing on flexible PVC sheet, usually called flex or frontlit flex. It is used for outdoor banners, shop signs and promotions because it is cheap, waterproof and quick to produce. Banners are finished with hems and eyelets for tying, or stretched over a frame for a flat look.
Most businesses need a banner sooner or later. A grand opening, a Ramadan offer, a sale, a sponsor wall at an event. Banners are fast to print, easy to fit and simple to replace when the message changes. The real choices are the material, how the banner will be fixed, and how long it has to survive outdoors. We help you get all three right.
This page covers general banner and flex printing. For specific uses, we also have dedicated pages on fence banners for construction hoardings, roll-up banners for indoor stands, and building wraps for full façades. Everything is printed on wide-format machines in our Ajman workshop, then welded, hemmed or eyeleted by hand. Our team can also install banners on walls, frames and poles.
Banner & Flex Printing we make
Frontlit PVC flex
Shop promotions and general useThe standard opaque banner material, printed on one side. Strong, waterproof and economical for shop fronts, promotions and wall-mounted signs lit from the front.
Backlit flex
Lightbox faces and night visibilityA translucent flex designed for light to pass through. Used as the face of lightboxes so colours stay bright when lit from behind at night.
Mesh banners
Large outdoor and windy spotsPerforated PVC that lets wind pass through. Ideal for large banners on scaffolding, railings and high walls where solid flex would act like a sail.
Fabric banners
Events, exhibitions and stage areasPolyester fabric printed with dye-sublimation for rich colour and a soft matte finish. Folds without creasing badly and looks premium at indoor events.
Double-sided banners
Hanging and street bannersTwo printed faces with a blockout layer between, so neither side shows through. Used for hanging banners seen from both directions.
Framed flex signs
Semi-permanent shop signageFlex stretched tight over an aluminium or steel frame for a flat, sign-like finish that lasts longer than a tied banner.
Banner materials and finishing
| Material | Wind behaviour | Typical outdoor life | Best finishing |
|---|---|---|---|
| Frontlit PVC flex | Solid; catches wind | Short to medium term in full sun | Welded hems and eyelets |
| Backlit flex | Solid; used inside frames | Medium term inside a lightbox | Silicone edge or frame tension |
| PVC mesh | Lets wind through | Medium term on scaffolds and walls | Reinforced hems and eyelets |
| Polyester fabric | Light; best indoors or sheltered | Short term outdoors | Silicone edge, pole pockets, sewn hems |
| Blockout double-sided | Solid; heavier than standard flex | Short to medium term | Pole pockets or eyelets |
| Flex on frame | Depends on frame fixing | Longer than tied banners | Stretched and laced or clipped |
Which banner material do you need?
Where will your banner go?
Frontlit PVC flex
A wall-fixed banner in standard frontlit flex is the economical choice. Ask for a frame if you want it to stay up for months and look like a proper sign.
PVC mesh banner
Mesh lets wind pass through, so it puts less load on the fixings and is less likely to tear. It suits large banners on open structures.
Backlit flex
Backlit flex lets light through evenly so colours stay bright at night. It is usually tensioned into an aluminium frame rather than tied.
Fabric banner
Dye-sublimated fabric gives rich colour without glare, folds for transport and looks more refined under event lighting than PVC.
Double-sided blockout banner
A blockout layer stops one side showing through the other. Add pole pockets or eyelets depending on how it hangs.
Fence banners
For hoardings and site fencing, see our fence banners page, which covers mesh options and long runs sized to your fence.
Getting a banner right
Match material to wind
Banners above head height or on open railings take strong wind loads. Use mesh for anything large or exposed, and save solid flex for walls, frames or sheltered spots.
Send artwork at the right size
Large banners are viewed from far away, so they do not need huge file resolution. Vector logos and text work best. We check your file and advise if images will look soft.
Specify the fixing points
Tell us how the banner will hang. Eyelets every half metre or so suit cable ties. Pole pockets suit flagpoles and street brackets. Frames give the neatest finish.
Write for a glance
Most banners are read in a few seconds from a car or across a road. Keep one main line, a short offer and a phone or web address in large type.
Plan for removal
Temporary banners eventually come down. Note who will remove them and when, especially for permits that run for a fixed period.
Banner printing for UAE weather and rules
UV and heat
Strong sun fades inks and makes cheap flex brittle. We use outdoor-grade materials and inks and suggest lighter backgrounds for long-running banners, which absorb less heat.
Shamal and sandstorms
Sudden wind can tear a banner from its fixings. Mesh, reinforced hems and enough tie points reduce the risk. On large banners we may add wind slits or a frame.
Advertising permits
Outdoor advertising banners in Dubai usually need a Dubai Municipality permit, and Sharjah and Ajman municipalities have their own process. Banners near roads may involve RTA. We confirm the current requirement for your site.
Bilingual and seasonal content
Ramadan, Eid and National Day promotions are big banner seasons. Plan artwork in Arabic and English early, as print queues get busy before these dates.
From brief to installed banner & flex printing
- 1
Brief and sizes
You tell us where the banner goes, its size, how long it will be up and how it will be fixed.
- 2
Artwork and proof
We check your file or design one for you, then send a scaled proof showing finishing and eyelet positions.
- 3
Large format print
The banner is printed on our wide-format machines in Ajman using material chosen for the site and duration.
- 4
Finishing
Edges are welded or hemmed, eyelets or pockets added, and large panels joined where the size exceeds the roll width.
- 5
Delivery or fitting
Collect from our showroom, have it delivered, or let our installers fit it on walls, frames, poles or scaffolding.
Banner & Flex Printing: common questions
What is the difference between flex and mesh banners?
Flex is a solid PVC sheet, while mesh has small holes that let air through. Flex gives the brightest, most solid print and suits walls and frames. Mesh is better for big banners on scaffolding or railings, because the wind passes through instead of pulling on the fixings. From a distance, both look similar.
How long does an outdoor flex banner last in the UAE?
It depends on sun exposure, wind and the material. A banner on a shaded wall can stay presentable for a long time, while one facing full summer sun will fade and stiffen faster. Framed banners last longer than tied ones. For long-term use, consider a rigid sign instead.
How quickly can you print a banner?
Standard banners are often ready quickly once artwork is approved, because we print in-house. Very large banners, joined panels, fabric or framed banners take longer. Busy periods before Ramadan, Eid and National Day can add time, so book early for seasonal promotions. Tell us your deadline when you send the artwork and we will confirm whether it can be met.
Can you print very large banners?
Yes. Banners wider than the printer roll are printed in panels and welded together, so the joins are strong and neat. For full building façades, our building wraps service covers the extra engineering, permits and access equipment that very large installations usually need. Mesh is usually the better material once a banner gets beyond a few metres wide outdoors.
Do I need a permit to hang a banner in Dubai?
Usually yes for outdoor advertising visible to the public. Dubai Municipality typically issues permits for banners, and Sharjah and Ajman municipalities have their own rules. Banners inside your own premises may not need one. We confirm the current requirement for your site and can handle the application.
What file format should I send for a banner?
A PDF or AI file with vector text and logos works best, set to the final size or to scale with bleed. High-resolution images are fine, but they do not need to be as dense as for small print. If you only have a logo, our designers can lay out the banner for you.
Often ordered with banner & flex printing
Print your banner
Send your size and artwork and we will reply with a free quote, usually within 24 hours.
- Call or WhatsApp +971 56 637 2656
- Workshop: Alam Square, Industrial Area 2, Ajman
- Sunday to Thursday, 08:00 to 18:00