Building wraps that turn
facades into landmarks.
Full-building and partial-facade wraps for commercial towers, hotels, construction scaffolding, and renovation projects across Dubai, Sharjah, and Ajman. Large-format UV-printed PVC mesh or solid PVC, heat-welded panel joints, and engineered fixing systems — designed for UAE wind loads and long-term outdoor performance.
Every building wrap format we produce
All printed in-house on our wide-format UV printers. We design the panel layout, print, weld seams, apply keder or eyelets, and install — including rope access or elevated work platform where required.
PVC mesh or solid PVC panels fixed to building scaffold frames during construction or renovation. Printed in vertical drops that join seamlessly — appearing as one continuous image across the full scaffold face. The graphic conceals the scaffold, improves site appearance, and delivers outdoor advertising impact for the duration of the build. Keder rail or rope fixing to scaffold tubes.
Large-format PVC mesh wrap covering the entire visible facade of a building — no scaffold required. Fixed directly to the building's external structure using engineered anchor points on each floor slab or facade grid. Used for advertising campaigns on commercial towers, hotel rebranding, and developer launches. Structural anchor design and rope-access installation included.
Wraps covering a defined zone — typically the podium levels (ground to 5th floor) or a specific facade section. More practical than a full wrap for operational buildings. Still achieves major visual impact at street level. Used for retail rebranding, hotel lobby facade, and commercial unit promotion visible to passing traffic.
Full-colour printed PVC banners fixed to a steel or timber hoarding panel system on the building perimeter. We supply and install printed graphic panels only, or design and install the complete hoarding frame system. DM-compliant layout with developer and contractor information, emergency contact, and safety messaging.
Short-term building wraps for brand activations, product launches, National Day campaigns, and major event sponsorships. Installed for a defined period and removed cleanly. Tensioning systems keep the print flat and crease-free throughout the campaign. Removal and site reinstatement included.
Temporary wraps covering a hotel or commercial tower during a rebrand or refurbishment — concealing the old signage and facade while presenting the new brand identity. Typically 6–24 months in situ. Allows the property to maintain branded presence during the renovation period. Structural assessment and anchor design included.
How we print and join panels across a building facade
A building wrap is not one piece of material — it is dozens of printed drops joined to appear seamless. How those joins are designed and executed determines whether the finished wrap looks like a single continuous image or a grid of obvious panels. This is where experience matters.
Wind loads on tall buildings are not the same as on fence banners.
At ground level, wind speed in the UAE averages 15–25 km/h. At 30 floors, the same wind event produces speeds 40–60% higher due to the boundary layer effect. A building wrap at height must be specified for dramatically higher wind loads — and the fixing anchor system must be engineered accordingly.
We do not use a standard fence banner specification for building wraps. Every wrap above two storeys receives a wind load calculation based on building height, site exposure class, and UAE design wind speed. This drives both the mesh density choice and the anchor spacing design.
What approvals a building wrap needs in Dubai
Building wraps occupy a regulatory grey zone — simultaneously a sign, a temporary structure, and an advertising medium. The approval chain depends on building type, wrap purpose, and whether it contains advertising or purely safety screening.
What building wraps cost in Dubai
Building wrap pricing is driven by print area in m², the access method required, and whether structural engineering is needed for anchor design. These are indicative ranges — every project is individually assessed.
What your building wrap is made from
UAE building wraps operate in one of the harshest outdoor environments on earth — direct UV radiation at altitude, 50°C ambient temperature, high coastal humidity, and cyclical wind stress. Material selection determines whether the wrap survives the planned campaign duration.
Which building wrap material for which application?
| Material | Wind safety | Print quality | Max height |
|---|---|---|---|
| PVC Mesh 510gsm | High | Good | Up to 10 floors |
| PVC Mesh 720gsm | Very high | Very good | Any height |
| Solid PVC 1,050gsm | Low (fixed only) | Maximum | Ground level only |
| Keder rail fixing | Best | — | All heights |
| Rope / eyelet fixing | Good | — | Up to 15 floors |
Where we install building wraps
Engineered for height.
Seamless at street level.
The difference between a building wrap that looks stunning from the street and one that sags, creases, or loses colour within six months comes down to material specification, panel joint design, and anchor engineering. We get all three right before printing a single square metre.
From brief to installed building wrap in 6 steps
What our clients say
"Bayan produced and installed the scaffold wrap for our 18-storey residential tower in Business Bay. The panel joints are completely invisible from street level — it reads as one continuous image. They handled the DM permit and building owner NOC, and the installation was completed in three days by their rope access crew."
"We needed a building wrap on our hotel during a lobby refurbishment. Bayan designed it to look intentional rather than a cover-up. The photomontage they produced before printing was exactly what got building management approval. The finished wrap looked premium for the entire 8-month renovation period."
"We commissioned a full podium wrap for a National Day campaign — 400m² across a 4-storey podium in JLT. Bayan surveyed, designed, got DM approval, printed, and installed in 12 days. The wrap stayed perfectly flat through the entire campaign period including a shamal event in week 3. Exceptional execution."
We install across all seven emirates
Our print facility is in Ajman Industrial Area 2. Building wrap installation crews are UAE-wide — including rope access certified teams for high-rise installations.
You might also need
Common questions about building wraps
- Yes, in most cases. Advertising wraps on buildings in Dubai require a Dubai Municipality sign permit. Construction safety wraps may fall under the building NOC or hoarding permit. The classification depends on wrap content, building type, and whether it contains paid advertising. We identify the correct permit category and submit on your behalf — you do not need to visit DM.
- When correctly installed, no. For scaffold wraps, all fixings are to scaffold tubes — nothing penetrates the facade. For facade-anchored wraps, we use anchor systems approved by the structural engineer and installed through existing penetration points where possible, or with sealant-backed anchors designed to be removable. We always confirm the anchor method with the building's structural engineer before drilling.
- With UV-cured inks and appropriate mesh specification, a PVC mesh building wrap maintains acceptable print quality for 2–3 years in direct UAE sun at low levels, and 1.5–2.5 years at higher levels where UV exposure and thermal cycling are more intense. Solid PVC in sheltered low-level applications can last 3–5 years. Scaffold wraps for a defined construction period (typically 12–24 months) are well within the material's rated outdoor life.
- Windows are handled in one of three ways depending on requirements: the wrap design visually incorporates the windows (the window grid becomes part of the design); the wrap uses perforated or mesh material that allows light through without cutting; or panels are cut out around window frames to leave them clear. For occupied buildings, we always discuss the window treatment with building management before finalising the design.
- For building wraps viewed from street level (minimum viewing distance 15–30m), we print at 25–72 dpi at actual size. For a 10m × 30m wrap, artwork at 1:10 scale must be at minimum 250 dpi (equating to 25 dpi at full size). We supply artwork specification guidelines when you brief us — many clients supply artwork at the wrong resolution and we catch this before printing, not after.
- Installation time depends on total area and access method. A 200m² podium wrap with scissor lift access typically takes 1–2 days. A 1,000m² scaffold wrap on a 20-storey building with rope access takes 4–7 days depending on crew size and site access windows. Many Dubai buildings restrict installation to evenings and weekends. We provide a programme with the quote so you can plan accordingly.
- Yes — wrap removal is a standard part of our service and is quoted at the outset. PVC mesh wraps release cleanly from keder rail systems and scaffold tubes. Facade anchor systems are removed and anchor points are sealed or made good. For DM permit closure, we photograph the completed removal and submit to DM. Removal is charged separately from installation and is typically 50–70% of the installation cost.
- No — all printing is done in our Ajman factory before delivery. If you have an existing wrap frame or keder rail system, we can produce replacement panels to fit — but we need to survey or receive confirmed dimensions of the existing system first. Do not print from old dimensions without re-measuring; buildings and scaffold systems settle and dimensions change between campaigns.
Get your building wrap
surveyed and quoted.
We manufacture outdoor & indoor signs, pylon signs, building wraps, menu boards — how can we help with your project?