Bayan Signage makes swimming pool signs for hotels, residential towers, community pools, schools and sports clubs from its factory in Ajman. We build rules boards, depth and no diving signs and plant room hazard signs in materials and 316 stainless fixings that survive chlorine, humidity and full sun, with a 5-year warranty on outdoor signs.
Swimming pool signs tell users how deep the water is, what they must not do, who is supervising and where to find help. A typical set covers a rules board at the entrance, depth markers at the shallow end, deep end and changes in slope, no diving signs where the water is shallow, lifeguard status signs, signs for ring buoys, first aid and emergency phones, and hazard signs on the plant room where chlorine is stored. Hotel operators, building managers, community associations, schools and clubs in the UAE all need them, often across several pools on one property.
Swimming pool decks destroy ordinary signs. Chlorinated air and splashes attack mild steel and low-grade stainless, humidity gets into unsealed edges, and summer UV fades cheap vinyl within one or two seasons. Coastal hotel pools add salt. In our Ajman factory we build pool signs from reverse-printed acrylic, exterior compact laminate, aluminium or 316 stainless, with A4 stainless fixings and nylon washers, because the screw is usually what fails first and stains the tiles below.
Bayan Signage is the production arm of Bayan Advertising, which has worked in the UAE for 15 years, and our factory at Alam Square, Industrial Area 2, Ajman has been producing signs since 2016. Our designers lay out rules boards around recognised pictograms in Arabic and English, our fabricators work in every pool-safe material, and our crews install early or late so a pool closes for hours rather than days.
Trusted by 500+ UAE businesses, including
A pool needs a short, consistent family of signs at the right points. These are the categories we make, with pages for the materials and related safety signs.
Entrance boards with about ten rules and pictograms, in compact laminate, or reverse-printed acrylic on laser-cut 316 stainless backing plates, for hotel and residential pools.
View details →Hazard and restricted access signs for chlorine stores and plant rooms, fixed on the door at eye level where pool staff actually see them.
View details →Location signs for first aid kits, ring buoys, rescue hooks and emergency phones, in the same chlorine-proof build as the rest of the pool set.
View details →Prohibition signs for the deck, bar and sun terraces, using standard symbols so guests understand them at a glance without reading the text.
View details →Changing room, shower and accessible facility signs for the swimming pool building, in humidity-resistant materials with sealed edges that do not swell or delaminate.
View details →We walk the swimming pool deck with your pool manager, note entry points, steps, depth changes, gates, plant room doors and sun exposure, and photograph existing tiled depth marks. Surveys are free in Dubai, Sharjah and Ajman.
We list every sign and its position, then lay out the rules board around pictograms with your approved wording, usually about ten points, in Arabic and English.
Shaded, fully exposed and indoor pools get different materials. We match face, backing and fixings to each sign's position, including salt exposure on coastal properties.
Faces are reverse-printed or UV-printed with protective laminate, CNC-cut, edges polished and rounded. Stainless parts are laser-cut and finished, then every sign is checked against the artwork.
Our crew fixes signs with 316 stainless hardware and sealed base plates, starting before opening or after closing to keep pool downtime short.
This is our standard specification for an outdoor residential or hotel pool. We adjust it for indoor pools and coastal sites, and itemise every option.
| Component | Our standard | Upgrade options | Why it matters |
|---|---|---|---|
| Face | Reverse-printed 5 to 6 mm cast acrylic | Exterior compact laminate, acrylic on laser-cut 316 stainless | Ink sits behind the acrylic, away from splashes, brushes and sunscreen. |
| Backing | 3 mm ACP behind acrylic outdoors | Self-supporting compact laminate | Stiff backing stops the face bowing in summer heat. |
| Edges | Polished, rounded, frameless | Powder-coated aluminium frame | No sharp edges near wet, barefoot users and no frame to trap water. |
| Fixings | A4 (316) stainless screws and stand-offs | Tamper-resistant heads | Lower grades rust within months near chlorine and stain walls and tiles. |
| Posts | Powder-coated aluminium with sealed base plate | 316 stainless posts | Water cannot pool around the base and attack the fixing. |
| Plant room signs | Rigid printed panels on the door | Photoluminescent safety signs | Hazard signs must stay readable in a humid, chemical-laden room. |
Swimming pool signs go wrong in quantity and placement more often than in design. These are the rules we follow.
A rules board with thirty clauses in small type is never read. Keep it to around ten points led by pictograms: supervision, children, shower first, no glass, no running, no diving in shallow water, emergency contact. Guest limits, booking rules and detailed policy belong in the resident handbook or membership terms, not on the fence.
Depth figures should be at least 100 mm high and in metres, the largest element on the sign. Some hotels add feet for international guests, but metres come first. Place markers at the shallow end, deep end and every change in slope, visible from the deck and the water, and complement the pool contractor's tiled marks rather than replacing them.
We see more pool signs ruined by fixings than by faces. Mild steel and 304 stainless screws start rusting within months near chlorinated water and leave brown streaks down render and tiles. Every fixing on our pool signs is A4 (316) stainless or aluminium, with nylon washers between dissimilar metals.
Signs fixed where they look tidy in a photo, on the far wall or behind a cabana, are rarely seen. No diving signs belong where swimmers step in at the shallow end, at eye level around 1,500 mm and on both sides. Rules boards go at the gate everyone passes through.
Chlorine stores and plant rooms need hazard and restricted access signs on the door at eye level. They are often missed because users never see them, but they protect maintenance staff and contractors, and inspections usually check them.
Every set of swimming pool signs is priced from its sign schedule. Send photos of the pool and deck, the number of pools and any existing signs, and we will usually send an itemised quote within 24 hours.
A single residential pool needs far fewer signs than a hotel with a main pool, children's pool and spa, though repeated designs keep unit cost down.
Printed aluminium is the most economical. Reverse-printed acrylic, compact laminate and acrylic on laser-cut 316 stainless cost more and last longer on a deck.
Posts with sealed base plates add material and installation time compared with signs fixed to walls or fences.
Coastal and fully exposed pools need upgraded materials and fixings, while shaded and indoor pools can use lighter specifications.
Adding a third language or custom illustrations for a children's pool adds design time and may need larger boards.
Work before opening, after closing or across several pools on one property affects the installation programme.
Dubai Municipality and authorities in other emirates set requirements for public and shared pools, typically covering supervision, depth markings, rules display and safety equipment. Hotels, community managers and master developers often add their own standards. Rules differ by emirate and pool type, so we confirm the current requirement with you or your community manager before finalising the set.
For symbols we follow recognised water safety signs, such as those in ISO 20712, and ISO 7010 style safety pictograms wherever a standard symbol exists. Plant room and chemical storage signs follow the same hazard sign conventions. Arabic and English text is generally expected, and we check the wording with you before production.
We cut, print and finish acrylic, compact laminate, aluminium and stainless steel at our Ajman factory, so material choice follows the pool, not a stock item.
Outdoor pool signs are covered for 5 years on finish and structure, with a warranty document at handover.
Our designers build each sign around recognised symbols, so guests and residents who read neither Arabic nor English still understand it.
Pool sets are installed before opening or after closing, by the same crew that made the signs, so the deck reopens quickly.
Main pool, kids' pool, spa and gym share one consistent design, with drawings kept for every future replacement.
Hotel groups, property managers, national retail groups and international brands return to our factory for new sites.
It depends on the number of signs and pools, the material, whether signs are freestanding and how exposed the pool is. A small residential set on printed aluminium costs much less than stainless-backed acrylic boards for a hotel with three pools. Send photos for an itemised quote, usually within 24 hours.
Shared residential pools in towers and communities typically need rules, supervision notices and depth markings, and municipalities and community managers often set their own requirements. Private villa pools have different expectations. Because rules vary by emirate and pool type, we confirm what applies before finalising the set.
Opening hours, supervision status, child supervision rules, shower before swimming, no glass, no running, no diving where shallow and an emergency contact. Keep it to around ten points with pictograms for the key messages, and move detailed policies into resident or member communications.
Exterior compact laminate, reverse-printed cast acrylic and 316 stainless steel usually last longest, because they resist chlorine, humidity and UV. Fixings matter as much as faces: 316 stainless or aluminium hardware prevents the rust staining that ruins otherwise sound signs.
Usually they complement them. Tiled depth marks on the pool wall or coping are normally installed by the pool contractor. Signs on walls, fences or posts help where tiles are faded or hidden by furniture. Many authorities expect depth markings visible from the deck and the water, so we coordinate with your pool contractor.
Yes, Arabic and English are generally expected on safety and rules signs in the UAE, with pictograms carrying the message to everyone else. Hotels with large guest groups from one country sometimes add a third language to the rules board, which means a larger board.
A typical set of swimming pool signs for a residential or hotel pool is a straightforward job for our factory, and we give you a realistic schedule with the quote. Installation is quick, and we work early or late to keep closure short. We install across all seven emirates from our Ajman factory.
Send your logo, the fascia size and a site photo. Our estimating team replies with options and an itemised price, usually within 24 hours.