Bayan Signage builds RGB LED signs that hold your brand colour on ordinary nights and switch to celebration colours on National Day, Eid or a launch. We fabricate the letters, neon or outline in our Ajman factory, wire and programme the controller in-house, and test every scene before installation. Outdoor RGB signs carry our 5-year warranty on LEDs, finish and structure.
An RGB LED sign is any illuminated sign whose LEDs mix red, green and blue chips to produce almost any colour, changed by a remote, an app, a schedule or a lighting controller. Channel letters, neon flex, lightboxes, edge-lit acrylic and building outlines can all be built this way. Hotels, lounges, gaming venues, entertainment brands, multi-brand retailers and tower owners choose them when a sign has to mark occasions, follow the mood of an evening or carry several brand colours.
Colour change is a lighting system wrapped inside a sign, and that is where the quality gap opens up. Plain RGB mixes a weak, bluish white; long runs drift towards red at the far end as voltage drops; controllers fail in hot, sealed boxes; and cheap modules show red, green and blue dots on the face. We choose RGBW where the sign is white most nights, feed power at the right intervals, keep controllers in ventilated enclosures and give the diffuser enough depth to blend the colours.
Bayan Signage has built illuminated signs at its own factory in Alam Square, Industrial Area 2, Ajman, since 2016, as the production arm of Bayan Advertising, which has worked in the UAE for 15 years. Our electricians assemble the LED modules, wire the drivers and controllers and run every sign through its colour scenes on the test bench, so the sign you approve in the factory is the one that changes on your facade. More than 500 clients across the UAE have trusted us with their signs.
Trusted by 500+ UAE businesses, including
Almost any illuminated sign can be built in RGB. These are the constructions we make most often, each with its own control set-up.
Opal-faced letters with RGB or RGBW modules inside 80 to 100 mm returns. The face glows as one smooth colour and can change for every occasion.
View details →Colour-changing flex for logos, slogans and interiors. RGB flex is wider than single-colour, so lettering is drawn slightly larger to suit it.
View details →RGB modules behind a printed or translucent face, so the background colour can shift while the artwork stays readable.
View details →Clear acrylic letters lit through their edges, changing colour in receptions, lounges and showrooms. Subtle up close and striking at night.
View details →Addressable pixel lines tracing a tower crown or facade, capable of chases, waves and national colours on a schedule set months ahead.
View details →We measure the site, find the power point and a cool, reachable spot for the controller, and agree which colours, scenes and occasions the sign must handle.
Our designers split the sign into zones and our draftsmen plan the power feeds and data runs on the shop drawing, which also goes into any permit submission.
Letters, panels and frames are CNC-routed, laser-cut or welded in our factory, with return depths and diffusers chosen so the three colours blend into one.
Electricians fit the modules, amplifiers and supplies, then programme the controller with your brand colour, a clean white, the agreed scenes and any dated occasions such as National Day.
Every scene runs on the test bench. You approve key colours on the lit sign, never on a screen, and each piece is checked against the approved drawing.
Our crew fixes the sign, mounts the controller in a ventilated enclosure, labels every cable and shows your staff how to change scenes and schedules.
This is our starting point for an outdoor colour-changing sign. Each choice is adjusted to the sign type, the site and how the sign will be used.
| Component | Our standard | Upgrade options | Why it matters |
|---|---|---|---|
| LEDs | RGB modules, Samsung or Epistar, IP65 | RGBW for true white, addressable pixel | RGBW gives a clean white and closer brand colours; pixels allow movement. |
| Diffuser | Opal acrylic face or silicone flex jacket | Deeper returns, double diffuser | Without enough diffusion the eye sees separate coloured dots at close range. |
| Controller | RF remote with preset scenes | Wi-Fi app, astronomical timer, DMX512 | The controller decides how easily staff change colours after we hand over. |
| Power | 12 V supplies sized for full white | 24 V for long runs, multiple feed points | Full white draws the most power; undersized supplies cause drift and failures. |
| Signal | Amplifiers on long runs | Signal boosters and data line protection | Amplifiers keep colour identical from the first letter to the last. |
| Enclosure | Ventilated, shaded driver and controller box | Lockable cabinet with surge protection | Controllers dislike heat more than LEDs do; a cool box keeps the sign changing. |
These are the questions our electricians ask before an RGB job is drawn. They decide whether the sign still looks right on its fifth National Day.
Plain RGB makes white by mixing three colours, and the result looks bluish or faintly pink beside a true white fitting. If the sign will spend 300 nights a year in white or a brand colour and the rest celebrating, RGBW adds a dedicated white chip. It costs a little more and needs slightly larger modules, but it is the difference between a sign that looks premium every night and one that only looks good on holidays.
A corporate orange or teal on a monitor is rarely what an RGB module produces. We light a sample letter or panel in the factory and adjust the mix with you until it matches, then save it as a scene. Some brand colours can only be approached, not matched exactly, and it is better to know that before the sign is on the building.
A 12 V RGB run usually needs power fed in every 5 m or so, and a 24 V run about every 10 m, otherwise the far end drifts towards red. Pixel data lines stay short between the controller and the first pixel unless boosters are added. On a building outline that means several supplies and a control cabinet, which need a reachable, ventilated home planned from the first drawing.
Fast flashing and chasing tire the eye, draw complaints from neighbours and are the first thing an authority objects to near a road. Slow fades and scheduled colour changes look more expensive and are easier to get approved. Keep the busy effects for indoor venues, where animation is part of the experience.
National Day, Flag Day, Ramadan and Eid are why many owners buy colour change, and then nobody remembers to switch it. We programme dated scenes into the controller at handover, so the sign changes on time without anyone climbing a ladder or finding the remote.
We quote every RGB sign from its drawing and control plan. Send us your logo, the sizes, a site photo and the effects you want, and you will usually receive an itemised quote within 24 hours.
Each step adds chips, wiring and controller channels to the same sign, with addressable pixels the most involved to build and programme.
One zone needs one controller output. Every word, letter or section that changes on its own adds wiring, outputs and programming time.
A remote is inexpensive. App control, DMX interfaces, astronomical timers and links to a building management system add hardware and commissioning.
A few preset colours are quick. Custom effects, synchronised sequences across several signs and a full calendar of occasions take real programming time.
Larger signs need more modules, amplifiers and supplies. Full white sets the power rating, so the electrical side grows faster than the sign.
High facades need lifts or rope access, and colour-changing signs facing roads may need more detailed submissions to the authority.
Authorities and landlords often treat colour-changing and animated signs differently from static ones. Near roads, Dubai Municipality and RTA may be concerned about driver distraction, and some communities and free zones limit colours, effects and lighting hours. Malls usually set their own tenant criteria on colour temperature and movement.
Our draftsmen prepare the drawings, specification and description of effects for the submission to Dubai Municipality, Sharjah or Ajman Municipality, or the free-zone authority for your area, and we programme the sign within whatever limits are approved. Requirements change and vary by site, so we confirm the current rules for your address at the survey.
Our fabricators build the letters or outline and our electricians design the power, data and control, so nothing falls between two contractors.
Scenes, schedules and dated occasions are set and tested in our Ajman factory, so the sign works properly on the first night.
We use Samsung or Epistar IP65 modules rated around 50,000 hours, for consistent colour from one letter to the next.
Outdoor RGB signs are covered for 5 years on LEDs, finish and structure, with a warranty document at handover.
Our own draftsmen prepare the drawings and submissions for Dubai Municipality, Sharjah and Ajman municipalities and free-zone authorities, including the description of effects.
Cables are labelled, controllers are reachable and your staff are shown how to change colours without calling us.
It depends on the sign type and size, whether you choose RGB, RGBW or pixel LEDs, the number of zones and the control system. A single-zone RGB lightbox costs far less than a pixel outline on a tower. Send us the logo, sizes, a site photo and the effects you want, and we will send an itemised quote, usually within 24 hours.
RGB mixes red, green and blue to make every colour, including white, which tends to look slightly blue or pink. RGBW adds a separate white chip, so whites are clean and many brand colours come closer. Choose RGBW if the sign will be white or one brand colour most of the time.
Often closely, but not always exactly. Some colours, especially certain oranges, teals and deep purples, can only be approached by mixing. We light a sample in the factory and adjust the mix with you until you are happy, then save it as a scene in the controller.
That depends on the controller you choose: a handheld remote, a phone app over Wi-Fi, a wall panel, or a DMX controller for larger systems. We programme your brand colour, scenes and dated occasions at handover and show your staff how to use them.
Usually they follow the same approval route as other outdoor signs, but authorities may look more closely at animated or colour-changing signs that face roads, and some communities restrict effects or colours. We describe the effects in the submission and confirm the current rules for your site.
The modules we use are rated for around 50,000 hours, and outdoor signs carry our 5-year warranty on LEDs, finish and structure. In practice the controller and power supplies set the lifespan, which is why we keep them in shaded, ventilated enclosures where they are easy to service.
Sometimes. Channel letters with enough depth and opal faces can often be refitted with RGB or RGBW modules and a controller, while shallow letters or thin faces may show coloured dots. We inspect the sign and tell you honestly whether a retrofit or a new sign is better value.
Yes. Our crews install in all seven emirates from our Ajman factory, and the site visit is free in Dubai, Sharjah and Ajman. For signs on high facades we arrange the access equipment as part of the job.
Send your logo, the fascia size and a site photo. Our estimating team replies with options and an itemised price, usually within 24 hours.